Filter
Top Products
Software Download Instructions 5 - 7
Figure 5-2. ProComm Installation Screen
10. Once ProComm is installed on the hard drive, you will be prompted to
swap in the 3Com FDK diskette as shown in Figure 5-3. Make sure
you place the correct diskette in the disk drive before pressing
[ENTER].
Figure 5-3. Post-ProComm Installation Screen
Chipcom CORPORATION
Firmware Distribution Kit Copyright 199X Chipcom Corporation
This Firmware Distribution Kit will install and configure ProComm,
a terminal emulation program, on you computer’s hard disk or on a
second floppy drive. The program will reside in the directory
called PROCOMM. Make sure you have the PROCOMM Distribution
Diskette and the 3Com Firmware Distribution Diskette ready at all
times during the installation.
*******************************************************************
*******************************************************************
******************
Insert the ProComm Distribution Diskette in Drive A
Press any key to continue...
******************
Insert the Chipcom Distribution Diskette in Drive A
Press any key to continue...