Filter
Top Products
Unpacking and Installing the Module 2 - 5
Figure 2-2. Installed EMM Connected to a Terminal
The RS-232 cable can be a maximum of 50 ft. in length. There are several
legal RS-232 cable configurations available depending on your installation.
Refer to Appendix B for more information on the exact RS-232 cable that
you need for your installation.
If you want to connect another type of device to the EMM, you can change
the factory default terminal settings of the EMM as described at the
beginning of Chapter 3.
Verifying Operation
This section explains how to verify module functionality.
1. The Status LED on the module should light and the Master Mgt
Module LED should light if this is the master EMM (or the only
management module in the concentrator).