Filter
Top Products
2 - 2 ONline Ethernet Management Module Installation and Operation Guide
Unpacking Procedure
Use the following procedure when unpacking the EMM:
1. Verify that the EMM is the correct model by matching the model
number listed on the side of the shipping carton to the model
number you ordered (5101M-MGTB, 5101M-MGTA, or
5101M-MGTS).
Note that the product model number printed on the shipping box
differs from the model number on the product. The model number
on the shipping box contains the prefix ’3C9’.
2. Remove the module, in its anti-static bag, from the shipping carton.
3. Remove the module from the anti-static shielding bag and inspect it
for damage. Always handle the module by the faceplate being
careful not to touch the components.
4. If the module appears to be damaged, replace it in the anti-static
shielding bag, return it to the shipping carton and contact your local
supplier.
We suggest you keep the shipping carton and anti-static shielding bag in
which your module was shipped in case you later want to repackage the
module for storage or shipment.
We also suggest that you record the serial number of your EMM. A log for
this and other information specific to your modules under the Slot Usage
Chart in Appendix B of the ONline System Concentrator Installation and
Operation Guide.