Filter
Top Products
5 - 2 ONline Ethernet Management Module Installation and Operation Guide
Download Requirements
A UDK key code is required to complete a software download to the EMM.
UDK key codes are usually provided with the UDK. However, you will need
to request a key code from 3Com if the key code is not provided on the
UDK package. If you need to request a key code from 3Com, locate the fax
form in the UDK shipment. Complete this form and fax it to 3Com so that a
Customer Service Representative can assign the proper key for your EMM.
The following download components are required before you can perform
a download:
❑ You must have the 3Com Firmware Distribution Kit (Part Number
5000-FDK) required for out-of-band downloads only. The FDK
includes:
– ProComm™ Reference Manual (from Datastorm
Technologies, Inc.) shrink-wrapped with:
– ProComm diskettes (3 1/2" disks)
– ProComm software license
– 3Com 3 1/2" diskettes
– 10 ft. RS-232 crossover cable
(refer to Appendix B for the cable pin assignments)
– 25-pin to 9-pin adapter
❑ You must have the ONline Ethernet Management Module Update
Distribution Kit from 3Com - Part Number 5100U-xxL-x.xx (limited,
single use license) or 5100U-xxU-x.xx (unlimited, site license),
including:
– 3Com 3 1/2" diskettes (two sets for site license)
– 3Com software license
– The new user manual for the module (four manuals for
site license)
– Release Notes