Filter
Top Products
Software Download Instructions 5 - 13
Figure 5-6. ProComm Menu Screen
8. Press [ENTER] to download the selected file to the EEPROM. This
process takes approximately 12 to 20 minutes at 9600 baud. If you
use a slower baud rate, the download will take much longer.
Once the download process begins, do not press any keys or
otherwise interfere with the process.
As the download proceeds, the screen shown in Figure 5-7 is
displayed and the Download LED on the EMM lights.
WARNING:
Download will erase your current operational code and
new software. You will need the following to replace
software:
1. PC running ProComm communications software.
2. Chipcom Netowrk Management Module software media (UDK).
If you are sure you want to perform a download command again within
10 seconds or the download will be aborted.
Preparing device for download...
Please enter the download sequence: <ALT> <F5>
Command Files
EMMx_xx.CMD
EMM1> maintain
Enter administrator password:
ONlin
versi
>> do
Command file:
ALT-F10 VT-100 FDX 9600 N81 LOG CLOSED PRT OFF CR CR