Filter
Top Products
Startup and Management Functions 3 - 11
❑ Ports - The EMM can assign each port on a per-port switching ONline
module to one of the available networks. Reconfiguration of network
assignments can be done at any time, without removing the module
from the concentrator or disrupting other configuration settings.
❑ Override Control - The EMM can override all ONline module dip
switch settings.
❑ Terminal - EMM terminal configuration values can be modified to
meet your particular application requirements.
❑ Security - The EMM address-to-port security feature enables you to
assign a maximum of four MAC addresses to a port. Whenever a
device assignment is changed, the EMM is alerted to the change in
MAC Address, sends a trap to the designated workstation, and
automatically disables that port.
❑ Fault Tolerance - The EMM can assign the ports of some modules
(e.g., Fiber Module, 10BASE-T Module) as redundant pairs in order to
provide fault-tolerant links between concentrators or between
devices (when using Fault-Tolerant Transceivers).
Establishing the User Password
Use the following command to establish a user password. Note that you
must be logged in as administrator to change the user password. The
default user password is [ENTER].
ONline> set device password user [ENTER]
Enter current administrator password: {administrator password} [ENTER]
New password: {new user password} [ENTER]
Verify: {new user password} [ENTER]