Filter
Top Products
Startup and Management Functions 3 - 27
Showing Counter Statistics
Once the EMM is assigned to a network, it continuously records and
updates traffic and error statistics on all Ethernet stations, ports, and the
network to which it is assigned. The SHOW COUNTER command can be
issued for a module, port, or network.
Issue the SHOW COUNTER command to display the total traffic and error
statistics recorded since either a module or port was first installed, or since
the last time the counters were cleared (using the CLEAR COUNTER
command).
Use the SHOW COUNTER MODULE command as shown to display traffic
and error statistics for the module in slot 3.
ONline> show counter module 3 [ENTER]
Non-zero counters for network ETHERNET_1 on 09 Aug 93:
Slot Frames Bcast CRC Err AlignErr Collisions
Time Octets Mcast TooLongErr Remote
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
3 1500 500 0 162 3
18:17:12 9000 1325 0
Use the SHOW COUNTER PORT command as shown to report traffic and
error statistics for the ports on module 3.
ONline> show counter port 3.all [ENTER]
Non-zero counters for network ETHERNET_1 on 09 Aug 93:
Slot.Port Frames Bcast CRC Err AlignErr Collisions
Time Octets Mcast TooLongErr Remote
LastSourceAddr Changes LastErrorAddr
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
3.1 1200 350 0 12 1
18:16:28 8600 125 0
08-34-8e-41-20-50 13 08-12-03-3e-74-06
3.2 150 75 0 75 1
18:16:28 200 600 0
08-04-23-15-10-67 4 08-40-65-8e-30-32
3.3 150 75 0 75 1
18:16:28 200 600 0
08-75-34-05-30-8d 7 08-35-46-75-60-32