Filter
Top Products
Software Download Instructions 5 - 11
Downloading the New Software
Use the following procedure to download software to the EMM.
1. Press [ENTER] to display the ONline> prompt and then log in to the
EMM as the system administrator.
2. Type the MAINTAIN command to enter maintenance mode where
the download can be completed.
ONline> maintain [ENTER]
Enter administrator password:
Enter the administrator password for that EMM and the following is
displayed:
Network agent executive system controller (vx.x)
Copyright 199x Chipcom Corporation
>>
3. Type the following download command and press [ENTER] to begin
the download procedure.
>> download out_of_band [ENTER]
WARNING:
Download will erase your current operational code.
You will need the following to replace the software:
1. PC running ProComm communications software.
2. Chipcom Network Management Module software media.
3. The serial number of the Upgrade Distribution Kit.
4. Chipcom Key Code, which is provided by completing the
UDK fax form and faxing it to 3Com at (508)460-6195.
Please list your return fax number, your Upgrade Dis-
tribution Kit Serial number, plus for non-site licenses
Management Module's ID number: 3658117
If you are positive you want to perform a download, enter
the 'download out_of_band' command again within 10 seconds.
Otherwise the sequence will be aborted.
>>