Filter
Top Products
Page 5-10
User and
Installation Guide
MANUAL TRACKING
Best with: Bit stream and analog recordings.
Once playback begins, the recorder's automatic tracking functions is engaged. If noise
appears in the picture, you can override this and make the adjustment manually by doing the
following:
1. Press the
Mode button until the remote is in
the D-VHS mode.
2. During playback, press the
Auto Track
button on the remote to cancel the
automatic tracking mode and enable
manual tracking adjustment.
3. Press the
Up or Down arrow button on
the remote, to adjust the tracking.
ࡗ Press briefly for fine adjustments, or
press and hold for substantial adjustment.
Watch the screen and continue adjusting
until optimum picture and sound quality
are achieved.
4. To re-engage automatic tracking, press the
Auto Track button on the remote again.
Remote
Menu Options
Buttons
MODE
5
AUTO TRACK
5
AUTO TRACK
Notes:
ࡗ To obtain a noiseless still picture it may be necessary to adjust tracking in slow motion
and then engage Pause.
ࡗ Manual tracking is possible during slow motion. Press the remote's
Up or Down arrow
button to adjust tracking during slow motion playback.