Filter
Top Products
Page 4-20
User and
Installation Guide
To lock the system, you must set a password:
ࡗ When you lock the system, you must enter and verify a 4-digit number password, which
you make up.
ࡗ Later, you must enter the same password to unlock the system, make changes to locked
features, or access locked programs.
When you have locked the system:
ࡗ If you try to access a locked program or channel, the recorder displays a message
prompting you to enter the password. You must also enter the password to access the
Parental and System Locks menu.
Ⅲ The system allows you three tries to enter the correct password.
Ⅲ If you do not enter the correct password in three tries, the system does not allow
more tries for several minutes.
ࡗ If you enter the correct password, you can then access the locked item or the
Parental
and System Locks menu.
ࡗ If you exit a locked item or the locks menu, you must reenter the password to access the
item or menu again.
If you forget your password, you will need to speak with a Service Center
Representative. You may need to provide the following information: (1) your
name; (2) your address; (3) your telephone number; (4) your recorder serial
identification number; and, (5) your Personal Identification Number (PIN), if
used.
CREATING OR MODIFYING CHANNEL LOCKS
1. Press the Mode button until the remote is in
SAT mode.
2. Press the
Menu button to open the
Main Menu.
3. Select the
Locks option.
Remote
Menu Options
Buttons
MODE
MENU
5
5 Locks