Filter
Top Products
Page 6-5
DISH
The dish reflects and focuses the signals from the satellites onto
the LNBF.
Flathead bolts with nuts attach the dish to the support arm
bracket.
LNBF SCREW AND WASHER
The LNBF screw and washer attach the LNBF to the end of the
support arm.
CABLE CLIP (OPTIONAL)
The cable clip holds the coaxial cable(s) to the top of the
support arm bracket.
MOUNTING BRACKET AND MAST ASSEMBLY
The mast assembly attaches the support arm (which holds the
dish and the LNBF) to the mounting surface.
Note: If you are planning to use a pole to mount the satellite
antenna, you will not need the mast assembly. In this case, the
pole (instead of the mast) fits into the support arm bracket.
However, you should keep the mast assembly in case you
decide to relocate the satellite antenna.
6
Starting Your Installation
Components of the Satellite Antenna