Filter
Top Products
Page 3-14
User and
Installation Guide
ADDING LOCAL OR CABLE CHANNELS
To add local broadcast or cable channels, do the following:
1. Press the
Mode button until the remote
is in SAT mode.
2. Press the
Menu button to open the
Main Menu.
3. Select the
System Setup option.
4. Select the
Installation option.
5. Select the
Add Local Channel option. If
you are setting up your local channels for
the first time or switching options in the
Select Cable/Broadcast list, follow the
steps in order. Otherwise, go to step 8 to
add channels to the
Selected Local
Channels list.
6. Press the
Left arrow button to move the
highlight into the
Select Cable/
Broadcast list.
7. Press the
Up or Down arrow button to
highlight either the
Broadcast Channels
option or the appropriate Cable Channels
option (Standard, HRC, or IRC)(Contact
your cable TV provider for information on
whether you have a standard, HRC or IRC
cable system. Press the
Select button to
choose the channel option.
Note: You can add either cable (Standard, HRC, or IRC) or broadcast channels,
not both. If you add one type of channel and then select another option, the
Selected
Local Channels list will not change. In that case, the channels in the list would not
be correct for the option you selected. So, whenever you change the option, you
should also edit the
Selected Local Channels list.
Remote
Menu Options
Buttons
T
H
E
M
E
6
2
MOD
E
MENU
1
6 System Setup
1 Installation
2 Add Local Chan.
Broadcast Channels
Standard Cable Channels
HRC Cable Channels
IRC Cable Channels
SELECT