Filter
Top Products
Polycom® RMX™ 1800 Administrator’s Guide
16-16 Polycom, Inc.
Create Certificate This button is used to create a Certificate Request to be sent to a
Certification Authority.
Certificate Method Select the method for sending the Certificate to the Collaboration
Server:
• CSR
• PEM/PFX
SIP Servers: Primary / Backup Server Parameter
Server IP Address Enter the IP address of the preferred SIP server.
If a DNS is used, you can enter the SIP server name.
Server Domain Name Enter the name of the domain that you are using for conferences, for
example:
user_name@domain name
The domain name is used for identifying the SIP server in the
appropriate domain according to the host part in the dialed string.
For example, when a call to EQ1@polycom.com reaches its
outbound proxy, this proxy looks for the SIP server in the
polycom.com domain, to which it will forward the call.
When this call arrives at the SIP server in polycom.com, the server
looks for the registered user (EQ1) and forwards the call to this Entry
Queue or conference.
Port Enter the number of the TCP or UDP port used for listening. The port
number must match the port number configured in the SIP server.
Default port is 5060.
Outbound Proxy Servers: Primary / Alternate Server Parameter
Server IP Address By default, the Outbound Proxy Server is the same as the SIP Server.
If they differ, modify the IP address of the Outbound Proxy and the
listening port number (if required).
Port Enter the port number the outbound proxy is listening to.
The default port is 5060.
Table 16-9 Default IP Network Service – SIP Servers (Continued)
Field Description
When updating the parameters of the SIP Server in the IP Network Service - SIP Servers dialog box,
the Collaboration Server must be reset to implement the change.