Filter
Top Products
Polycom® RMX 1800 Administrator’s Guide
19-52 Polycom, Inc.
ActiveX Bypass
At sites that, for security reasons, do not permit Microsoft® ActiveX® to be installed, the
MSI (Windows Installer File) utility can be used to install .NET Framework and .NET
Security Settings components on workstations throughout the network.
All workstation that connect to Collaboration Server systems must have both.NET Framework
and .NET Security Settings running locally. These components are used for communication
with the Collaboration Server and can only be installed on workstations by users with
administrator privileges.
The MSI utility requires the IP addresses of all the Collaboration Server systems (both
control unit and Shelf Management IP addresses) that each workstation is to connect to.
If the IP address of the any of the target Collaboration Servers is changed, the ActiveX
components must be reinstalled.
Installing ActiveX
To install ActiveX components on all workstations in the network:
1 Download the MSI file EMA.ClassLoaderInstaller.msi from the Polycom Resource
Center.
The MSI file contains installation scripts for both .NET Framework and .NET Security
Settings.
2 Create a text file to be used during the installation containing the IP addresses of all the
Collaboration Server systems (both control unit and Shelf Management IP addresses)
that each workstation in the network is to connect to.
The file must be named url_list.txt and must be saved in the same folder as the
downloaded MSI file.
TRANS_OPERATOR:CHANGE_PASSWORD
TRANS_OPERATOR:DELETE_OPERATOR
TRANS_OPERATOR:NEW_OPERATOR
TRANS_SNMP:UPDATE
Table 19-24 Transactions (Continued)
Transaction