Filter
Top Products
Polycom® RMX 1800 Administrator’s Guide
20-16 Polycom, Inc.
OCSP_RESPONDER_TIME
OUT
Not Supported in RMX 1800.
Determines the number of seconds the RMX is to wait for an
OCSP response from the OCSP Responder before failing the
connection.
Network latency or slow WAN links can cause login problems
when logging in to the RMX’s Management Network.This
System Flag’s value determines the number of seconds the
MCU is to wait for an OCSP response from the OCSP
Responder before failing the connection.
Default: 3 (seconds)
Range: 1-20 (seconds)
PORT_GAUGE_ALARM When set to YES, if system resource usage reaches the High
Port Usage Threshold as defined for the Port Gauges, System
Alerts in the form of an Active Alarm and an SNMP trap are
generated.
PRESERVE_PARTY_CELL_
ON_FORCE_LAYOUT
Used to prevent reassignment of cells in a forced layout that
were assigned to endpoints that have disconnected, paused
their video, or have been removed from the conference. The
cell will remain black until the endpoint reconnects or a new
layout is used, or the conference ends.
Range: YES / NO
Default: NO
• NO - Cells of dropped endpoints are reassigned.
Endpoints that reconnect will be treated as new endpoints.
• YES - Cells of dropped endpoints are not reassigned, but
will be reserved until the endpoint reconnects.
For information see the Polycom RMX 1800 Getting Started
Guide, "” on page 3-48.
QOS_IP_AUDIO Used to select the priority of audio packets when DiffServ is
the is the selected method for packet priority encoding.
Default: 0x31
QOS_IP_VIDEO Used to select the priority of video packets when DiffServ is
the is the selected method for packet priority encoding.
Default: 0x31
QOS_MANAGEMENT_NET
WORK
Enter the DSCP value for the RMX Management Network.
Default: 0x10
Range: 0x00 - 0x3F
REDUCE_CAPS_FOR_RED
COM_SIP
To accommodate Redcom’s SDP size limit, when the flag
value = YES, the SDP size is less than 2kb and includes only
one audio and one video media line.
Default: NO
REDIAL_INTERVAL_IN_SEC
ONDS
Enter the number of seconds that the Collaboration Server
should wait before successive re dialing attempts.
Range: 0-30 (Default: 10)
Table 20-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description