Filter
Top Products
PCS -1/1P
3-207-456-12 (1)
I:\3207456121PCS1WW\06OPE.FM
masterpage:Left
107Sending Audio/Video from the External Equipment to a Remote Party
Chapter 4: Videoconference With Optional Equipment
Sending Audio/Video from the External
Equipment to a Remote Party
The Communication Terminal allows you to send the picture and sound output
from the connected equipment such as a VCR to the remote party.
To connect the video equipment for input
The Communication Terminal is equipped with two video inputs.
Be sure to connect the audio cable to either of two VCRs.
To input audio/video from external equipment
To input video
Open the Video Input Select menu by pressing the VIDEO INPUT SELECT
button on the Remote Commander, then select the desired video input from the
“Near” text box in the menu.
To input the video from the equipment connected to the VIDEO IN AUX 1 or
2 jack, choose “AUX 1” or “AUX 2”, respectively.
To input audio
Set “Input Select” to “AUX” or “MIC + AUX” in the Audio Setup menu. (See
page 42.)
Note
DC 19.5V
AUDIO OUT
AUDIO IN
AUX1–
VIDEO IN
–AUX2
CAMERA UNIT MIC
(PLUG IN POWER)
(MIXED)
AUX
MAIN
–
MONITOR
–
SUB
VIDEO OUT
RGB OUT
IR OUT
100BASE-TX
10BASE-T
12
1 2
ISDN UNIT WHITE
BOARD
DSB
TERMINAL VISCA OUT
to AUDIO IN
to VIDEO IN
AUX 2
to video output
VCR, etc.
Video connecting
cable (not supplied)
to S-video
output
S-video connecting cable (not supplied)
to VIDEO IN
AUX 1
VCR, etc.
to audio output
Audio connecting cable
(not supplied)