Toshiba PCS-1 VCR User Manual


 
PCS -1/1P
3-207-456-12 (1)
I:\3207456121PCS1WW\06OPE.FM
masterpage:Left
91About a “Memory Stick”
Chapter 4: Videoconference With Optional Equipment
Before using a “Memory Stick”
When you set the “Memory Stick” write-
protect tab to “LOCK,” data cannot be
recorded, edited, or erased.
Use a sharp object, such as a ballpoint pen,
to move the “Memory Stick Duo” erasure
prevention switch.
Data may be damaged if:
You remove the “Memory Stick” or turn
off the unit while it is reading or
writing data.
You use the “Memory Stick” in a
location subject to the effects of static
electricity or electric noise.
Do not attach any other material than the
supplied label onto the label space.
Attach the label so that it does not stick out
beyond the labeling position.
Do not write forcefully on the “Memory
Stick Duo” memo area.
Carry and store the “Memory Stick” in its
case.
Prevent metallic objects or your finger from
coming into contact with the metal parts of
the connecting section.
Do not strike, bend, or drop the “Memory
Stick.”
Do not disassemble or modify the “Memory
Stick.”
Do not allow the “Memory Stick” to get wet.
Do not use or store the “Memory Stick” in a
location that is:
extremely hot, such as in a car parked in
the sun.
under direct sunlight.
very humid or subject to corrosive
substances.
.....................................................................
“Memory Stick Duo” and
are trademarks of Sony
Corporation.
“Memory Stick” and are trademarks of
Sony Corporation.
“MagicGate Memory Stick” and
are trademarks of Sony
Corporation.
“Memory Stick-ROM” and
are trademarks of Sony
Corporation.
“Memory Stick PRO” and
are trademarks of Sony
Corporation.
“Memory Stick R” and are
trademarks of Sony Corporation.
A “Memory Stick” formatted with a
computer cannot be guaranteed on the
Communication Terminal. Make sure to use
a “Memory Stick” that has been formatted
with the Communication Terminal.
If you format a “Memory Stick”, all data,
including the still images and Phone Book,
will be lost.
To format a “Memory Stick”
Select “Memory Stick Format” from the
General Setup menu. The message “Format
a Memory Stick?” appears. When you select
“OK”, the “Memory Stick” will be
formatted.
If a “Memory Stick” that is not
formatted is inserted
The message “Format a Memory Stick?”
appears. To format it, select “OK”. If you do
not want to format it, select “Cancel”.
Notes
Terminal
Write-protect tab
Labeling position
Formatting a “Memory Stick”
Notes