Filter
Top Products
30 Using the Menu
PCS-1/1P
3-207-456-12 (1)
I:\3207456121PCS1WW\03OVR.FM
masterpage:Left
When you set “DHCP Mode” to “Auto”,
the assigned IP address is shown in the
launcher menu (page 57) or Machine
Information menu (page 50).
When you do not know how to set up the
LAN configuration, contact your
network administrator.
10Use the V, v, B or b button to select
“Next”, then press the PUSH ENTER
button.
The message window for confirmation
appears.
11Use the V, v, B or b button to select
“Save”, then press the PUSH ENTER
button.
The settings are saved.
To cancel the setting
Press the V, v, B or b button to select
“Cancel”, then press the PUSH ENTER
button.
To go back to the previous wizard
Press the
V, v, B or b button to select
“Previous”, then press the PUSH ENTER
button.
Using the Menu
The Video Communication System uses the
on-screen menus to make various
adjustments and settings. This section
describes how to adjust or set the items in the
menus and gives a brief introduction of the
menus.
For the menu configuration, see page 183.
The basic operation through the menu is
explained by taking the Setup menu.
1 Press the MENU button on the
Remote Commander, or press the V,
v, B or b button to select “Menu” and
press the PUSH ENTER button in the
launcher menu.
The Setup menu appears.
2 Press the b button, then press the
PUSH ENTER button.
The top item is selected.
Note
CancelPrevious
Save
Operation
Off
Multipoint Mode
Keep pressing the [MENU] button to show
more detailed setup menus.
Sound Priority
Video/Audio
Setup
Save Cancel
Off
Multipoint Mode
Keep pressing the [MENU] button to show
more detailed setup menus.
Sound Priority
Video/Audio
Setup
Save Cancel