Filter
Top Products
PCS -1/1P
3-207-456-12 (1)
I:\3207456121PCS1WW\09OTH.FM
masterpage:Left
161On Screen Messages
Appendix
On Screen Messages
Check the following if a message appears on the TV monitor when operating
the Communication Terminal.
Message Meaning
Incorrect dialing setup. Make sure the selected entry is correctly registered.
CANNOT COMPLETE CONNECTION
(The following code and message appear.)
—
0 Unknown network error: Try again later.
1 Number does not exist: Check the number and try again.
2,3,6 Network congestion: Try again later.
16 Normal disconnection: (The line has been disconnected normally.)
17 Line is busy: Try again later.
18,19 System not responding: Check if the remote system is connected.
20 No such subscriber Confirm the site number..
21 Call rejected: Check if the remote system is connected.
22 Called party number changed: Check the number and try again.
26 Connection restoration request: Try again later.
27 Remote system out of order: Check if the remote system is operational.
28 Invalid number entered: Check the number and try again.
31, 34, 41 – 44, 47
Network not available:
Try again later.
50 Not a Subscriber: Check the remote party’s facility contract.
57,58 Bearer capability not authorized: Check if “Restrict” is set correctly.
70 Restricted capability: Set “Restrict” to “56K” and try again.
88 Terminal attribute error: Check the connection of the remote system.
91, 95 – 102, 111
Protocol error:
Turn off and restart the system and try again.
128 H.221 negotiation timeout: Turn off and restart the system and try again.
132 Invalid SPID: Reregister the SPID.
134 Physical link synchronization
error:
Check the connection of the ISDN cable.
144, 145
Bonding negotiation timeout:
Turn off and restart the system and try again.
177 LAN connection timeout: Try again later.
178 LAN connection rejected: Try again later.
179 DNS error: Please check DNS.