Filter
Top Products
PCS-1/1P
3-207-456-12 (1)
I:\3207456121PCS1WW\03OVR.FM
masterpage:Left
19System Connections
Chapter 1: Installation and Preparation
System Connections
This section describes the typical system connections.
• Be sure to turn off all the equipment before making any connections.
• Do not connect/disconnect the camera cable with the power on. Doing so may damage
the Camera Unit or Communication Terminal.
• For safety, do not connect the 100BASE-TX/10BASE-T connector to a network that
applies an excess voltage via the 100BASE-TX/10BASE-T connector.
Notes
System Connection via a LAN
DC 19.5V
AUDIO OUT
AUDIO IN
AUX1–
VIDEO IN
–AUX2
CAMERA UNIT MIC
(PLUG IN POWER)
ISDN UNIT WHITE
BOARD
(MIXED)
AUX
MAIN
–
MONITOR
–
SUB
VIDEO OUT
RGB OUT DSB
IR OUT
100BASE-TX
10BASE-T
12
1 2
TERMINAL VISCA OUT
PCS-C1/C1P Camera Unit
to TERMINAL
PCS-P1/P1P
Communication
Terminal
Camera cable*
Audio
connecting
cable*
S-video
connecting
cable*
Power cord*
to CAMERA UNIT
to AUDIO
OUT
to VIDEO
OUT
MONITOR
MAIN
to S-video
input
to audio input
to 100BASE-TX/
10BASE-T
to LAN
TV monitor**
to a wall outlet
to DC19.5V
PCS-AC195
AC adaptor
to a wall outlet
* supplied
**not supplied
UTP cable (category 5, straight)**