Filter
Top Products
PCS -1/1P
3-207-456-12 (1)
I:\3207456121PCS1WW\07OPE.FM
masterpage:Left
119Using Audio/Video Signal from the Connected Equipment for a Conference
Chapter 5: Data Conference
Using Audio/Video Signal from the
Connected Equipment for a Conference
To use a microphone connected to the Data Solution Box
Set “Mic Select” to “DSB MIC” in the Audio Setup menu (page 43).
To use a projector, etc. connected to the RGB OUT connector on the Data
Solution Box
Set “Monitor Out (or Sub Monitor Out)” to “RGB OUT (DSB)” in Page 1 of
the General Setup menu (page 43).
To select a picture from a computer connected to the Data Solution Box
Press the RGB A or RGB B button on the upper panel of the Data Solution
Box.
To select the picture from the computer connected to the RGB IN A connector,
press the RGB IN A button, or the RGB IN B button to select that from the
computer connected to the RGB IN B connector.
The indicator of the selected button lights.
To transmit a picture from a computer connected to the Data Solution Box
Press the SEND button on the upper panel of the Data Solution Box.
The indicator on the SEND button lights and the picture of the equipment
selected with the RGB A or RGB B button is displayed on the projector, etc.
connected to the RGB OUT connector on the Data Solution Box. While in
communication, the picture selected on the Data Solution Box is transmitted to
the remote party simultaneously.
Such computer picture is displayed without any conversion as input to the Data
Solution Box. The detailed portion of the picture transmitted to the remote
party may not be clearly seen and the number of frames may be reduced.
Setting Before Conferencing
Operating the System During a Conference
RGB IN BRGB IN A
RGB A
SEND
RGB SELECT
RGB B
RGB A button RGB B button