Filter
Top Products
PCS -1/1P
3-207-456-12 (1)
I:\3207456121PCS1WW\09OTH.FM
masterpage:Left
157Location and Function of Parts and Controls
Appendix
a Lens
b Microphone
c POWER indicator (green)
Lights when the power switch on the
Communication Terminal is set to on
and goes out when it is set to off or the
Terminal is set to standby mode.
d Remote sensor
Point the Remote Commander to the
sensor when operating this System.
e Infrared sensor
Receives the infrared wireless signal
from the optional PCS-DS150
Document Stand. The received signal is
used as object input.
f TERMINAL connector
Connect to the CAMERA UNIT
connector on the Communication
Terminal.
g VISCA OUT connector
The connector does not function with
this System.
h Tripod hole
Use to attach the camera on a tripod.
You can set for a beep not to sound by
pressing the button on the Remote
Commander with the Audio Setup menu.
For the setting, see “Audio Setup Menu” on
page 42.
a MIC ON/OFF button
Cuts off the local sound to be sent to a
remote party. To restore the sound, press
the button again.
b VOLUME +/– button
Adjusts the volume of the sound
received from a remote party.
+: to increase the volume
–: to decrease the volume
PCS-R1 Remote Commander
PCS-R1
MIC
ON/OFF
VOLUME
DISPLAY
CLEAR SYMBOL
PinP FAR/NEAR
BACK
SPACE
PUSH
ENTER
CONNECT/
DISCONNECT
HELP
RETURN MENU
ALPHA/
NUM
VIDEOINPUT
SELECT
ZOOM