Filter
Top Products
PCS -1/1P
3-207-456-12 (1)
I:\3207456121PCS1WW\08OPE.FM
masterpage:Left
133Connection Examples for a Multipoint Videoconference
Chapter 7: Multipoint Videoconference
Installing the optional PCS-320M1 H.320MCU software in one
Communication Terminal allows you to conduct a multipoint videoconference
among up to six points.
About the number of ISDN lines used and number of remote
parties for a multipoint conference
Set the number of ISDN channels and the number of remote points in the
Multipoint Setup menu. The following combinations are available.
1B × 5: Connects to five points via a 1B channel. (Six-point conference)
2B × 5: Connects to five points via a 2B channel. (Six-point conference)
4B × 3: Connects to three points via a 4B channel. (Four-point conference)
6B × 2: Connects to two points via a 6B channel. (Three-point conference)
To connect with a normal phone
When you are using an ISDN connection, a normal phone can be connected at
up to five points.
The 1B connection is only available for a normal phone.
When using the ISDN connections, installing the PCS-320M1 H.320 MCU software
into two or more Communication Terminals does not allow cascade connection.
Using the ISDN Connection
Note
ON LINEPOWER LAN ALERT ON LINEPOWERLAN ALERT ON LINEPOWERLAN ALERT ON LINEPOWER LAN ALE RT ON LINEPOWERLAN ALERT
DC 19.5V
AUDIO OUT
AUDIO IN
AUX1–
VIDEO IN
–AUX2
CAMERA UNIT MIC
(PLUG IN POWER)
(MIXED)
AUX
MAIN
–
MONITOR
–
SUB
VIDEO OUT
RGB OUT
IR OUT
100BASE-TX
10BASE-T
12
1 2
ISDN UNIT WHITE
BOARD
DSB
TERMINAL VISCA OUT
ISDN
PCS-320M1
H.320 MCU
software
to ISDN 1-6
PCS-B768 ISDN
Unit
to ISDN lines
ISDN modular cables
(not supplied)