Filter
Top Products
II) V24/RS232/485 Interface - Single Analyzers and Systems
90003752(1) [AK-Commands] 10/98
AK
2 - 75
TTypical meanings of errors for certain devices:
NDIR/NDUV Analyzers
No. 1 = Flow error
No. 2 = Chopper failure
No. 3 = Thermostat failure
No. 4 = RAM error
No. 5 = Calibration error zerogas
No. 6 = Calibration error spangas
No. 7 = Range overflow
No. 8 = External error (digital input)
No. 9 = Error of pressure measurement
No.10 = Error of temperature measurement
TFID Analyzers
No. 1 = Flow error
No. 2 = Flame out
No. 3 = Thermostat failure
No. 4 = RAM error
No. 5 = Calibration error zerogas
No. 6 = Calibration error spangas
No. 7 = Range overflow
No. 8 = Fuel gas error
No. 9 = Fuel air error
No.10 = H
2
generator failure (optional H
2
generators, if available)
No.11 = Temperature of the heated wires
No.12 = Temperature of the heated filters
No.13 = Response of ethane too high (optional for methane free measurement)