Filter
Top Products
2 - 34
AK
90003752(3) [AK-Commands] 11/03
SRON – Control command "Delay modus ON"
SROF – Control command "Delay modus OFF"
Starting this command the analyzers in a system or the single analyzer will determine
measurement and integral values (averages), that will be delayed according to the delay
time of the write command "EVEZ". The read commands "AKON", "AIKO" and "AIKG" will
get an old value according to the synchronization time of the command "EVEZ". The
analog output will get the same delay. With the command "Delay modus OFF" the
integrators will start immediately and the measurement and integral values will be
determined and sent out without delay.
Control command
SRON K0
SROF K0
Function associated to the whole system unit
Code
SRON Kn
SROF Kn
Function associated to channel n
Code
Response
SRON 0
SROF 0
Error status
Code