Filter
Top Products
II) V24/RS232/485 Interface - Single Analyzers and Systems
90003752(1) [AK-Commands] 10/98
AK
2 - 35
SSPL – Control command "Purging"
Starting this command the analyzers in a system or the single analyzer will switch on the
purge gas valve and the pumps necessary for the purge gas transport.
This function can be finished either by a new command or by a defined time interval. After
the purging will be over the system, the analyzer in a system or the single analyzer will
change to the stand-by mode.
Control command
SSPL K0
Function associated to the whole system unit
Code
SSPL Kn
Function associated to channel n
Code
Response
SSPL 0
Error status
Code