Filter
Top Products
2 - 80
AK
90003752(1) [AK-Commands] 10/98
ATEM Read command "Temperature"
To this read command the analyzers in a system or the single analyzer will send to the
TBCC the following data for the called channel (device) and subchannel (temperature
measurement):
∗ The signal in Kelvin.
Read command
ATEM K0 (m)
ATEM Kn (m)
Read of channel n (and subchannel m).
Note: Subchannel m is not in use at the moment.
Code
Response
ATEM 0 XXX
Temperature
Error status
Code