Filter
Top Products
2 - 8
AK
90003752(3) [AK-Commands] 11/03
3. Description of all Control Commands
SALI – Control command "Linearization check with spangas"
Starting this command the analyzer in a system or the single analyzer will start the
spangas flow with all available spangases one after another. It will check the setpoint
values automatically. The device will record the determined values and store the raw/
setpoint deviations. These deviations can be read with the command "AALI".
Control command
SALI Kn Mx
Function associated to channel n, range x
Code
Response
SALI 0
Error status
Code