Filter
Top Products
2 - 24
AK
90003752(3) [AK-Commands] 11/03
SLST – Control command "Set linearization step"
Starting this command the gas distribution will switch on the named distribution step. The
device will work like described for the commands "SLIN" or "SLCH" depending on the
current procedure. The device will only accept the "SLST" command, if the commands
"SLIN" or "SLCH" were received before followed by the command "ELST".
Control command
SLST K1 n
Distribution step
Function associated to channel 1
Code
Response
SLST 0
Error status
Code