Filter
Top Products
EKAK – Write command "Calibration gas concentration"
With this write command the analyzers in a system or the single analyzer will get the
spangas values for each range.
Write command
EKAK K0 M1 YYYY ... Mx ZZZZ
EKAK Kn M1 YYYY ... Mx ZZZZ
Spangas value
Addressed range x
Spangas value
Addressed range 1
Addressed channel n
Code
Response
EKAK 0
Error status
Code
2 - 88
AK
90003752(1) [AK-Commands] 10/98