Filter
Top Products
2 - 68
AK
90003752(1) [AK-Commands] 10/98
AMBE – Read command "End of range"
To this read command the analyzers in a system or the single analyzer will send to the
TBCC the following data for the called channel (device):
∗ The end of range values in ppm.
Read command
AMBE K0 [Mx]
AMBE Kn [Mx]
Range number (optional)
Read of channel n
Code
Response
AMBE 0 Mx XXX
End of range x
Range No. x
Error status
Code
The values will get the same format for the read of single channels.