Filter
Top Products
II) V24/RS232/485 Interface - Single Analyzers and Systems
90003752(1) [AK-Commands] 10/98
AK
2 - 51
AIKO – Read command "Concentration integral value"
To this read command the FU will send to the TBCC the following data:
∗ The corrected average signal valid at that moment (e.g. analyzed value), that has been
calculated since the last "SINT" command resp. the last "AIKO" command. The physical
parameter is described in the section about FU. The value will be limited to six relevant
digits, because it is useless to send gas concentrations in an accuracy less than pars
pro mille. Look at the example of the "AKON" command !
Read command
AIKO K0
Read of the whole system unit
Code
AIKO K1 ... Kn
Read of channel n
Read of channel 1
Code