Filter
Top Products
II) V24/RS232/485 Interface - Single Analyzers and Systems
EMDR – Write command "Manual adjusted pressure"
With this write command the analyzer will get a pressure value for the called channel. This
value will be used as pressure correction, if no pressure measurement is installed in the
device.
Cf. "AMDR", "ADRU" !
Write command
EMDR Kn a
Pressure in Pa
Read of channel n
Code
Response
EMDR 0
Error status
Code
90003752(1) [AK-Commands] 10/98
AK
2 - 97