Filter
Top Products
97
If locations in the song have been registered to the [IN/
LOC1], [OUT/LOC2], [TO/LOC3], and [END/LOC4]
keys, you can use them to perform the following func-
tions.
• Locate point (→p.35)
Press each key to move to the registered location.
• Loop playback in/out points (→p.33)
• In/out points for auto-punch recording (→p.31)
• Editing locations for track editing (→p.51)
• In-out playback
With this function, you can hold down the [IN/
LOC1] key and press the [OUT/LOC2] key to play-
back from the IN time registered in the [IN/LOC1]
key to the OUT time registered in the [OUT/LOC2]
key. This provides a convenient way to play back the
IN–OUT range so that you can check its contents.
Locate functions
IN/LOC1
The following time location registered to the [IN/
LOC1] key.
• Locate point 1
• Punch-in time for auto-punch recording
• Playback start time for loop playback
• Playback start time for in-out playback
• The following times for track editing operations
Copy source start time for “CopyTrack”
Start of blank insert location for “InsertTrack”
Start of erased region for “EraseTrack”
Start of deleted region for “DeleteTrack”
Start time of swap source and swap destination
for “SwapTrack”
Start of reversed region for “ReverseTrack”
Start of expanded/compressed region for “Exp/
CompTrack”
“OptimizeTrack” start time
“FadeTrack” start time
“NormalizeTrack” start time
OUT/LOC2
The following time location registered to the [OUT/
LOC2] key.
• Locate point 2
• Punch-out time for auto-punch recording
• Playback end time for loop playback
• Playback end time for in-out playback
• The following times for track editing operations
Copy source end time for “CopyTrack”
End of blank insert location for “InsertTrack”
End of erased region for “EraseTrack”
End of deleted region for “DeleteTrack”
End time of swap source and swap destination
for “SwapTrack”
End of reversed region for “ReverseTrack”
End of expanded/compressed region for “Exp/
CompTrack”
“OptimizeTrack” end time
“FadeTrack” end time
“NormalizeTrack” end time
TO/LOC3
The following time location registered to the [TO/
LOC3] key.
• Locate point 3
• The following times for track editing operations
Copy destination time for “CopyTrack”
Reverse copy destination time for “Reverse-
Track”
Start time + copy destination time of expanded/
compressed data for “Exp/CompTrack”
END/LOC4
The following time location registered to the [END/
LOC4] key.
• Locate point 4
• The following time for track editing operations
End time of expanded/compressed data for
“Exp/CompTrack”
10. IN/LOC1, OUT/LOC2,
TO/LOC3, END/LOC4
Reference
TEMPOIN/LOC1