Filter
Top Products
10 - 22
MELSEC-F
USING THE E-MAIL FUNCTION10
10 - 22
(3) Sending from a personal computer
This section explains how to send e-mails from a PC/UNIX to the Ethernet
module.
Once an environment that is capable of using the Internet through an application
program that handles e-mail is set up, e-mail can be created and sent on the New
Message screen.
(a) To
Mail address of the Ethernet module.
(b) Subject
Subject of the e-mail to be sent to the Ethernet module in ASCII format.
(c) Main text
Do not assign data (the Ethernet module ignores it.)
(d) Attach file
Data can be sent as an attached file.
Send the attached file data as binary data.
* The Ethernet module does not convert the received attached file data from
ASCII to binary.
(e) Attached file name
Designate the name of the attached file using alphanumeric characters. (It is
recommended to use the name within eight characters.) Designate either
".bin" or ".asc" for the attached file extension. The stored data will be
received as binary data.
NOTE
Designate a single attached file when sending e-mail to the Ethernet module.
If more than one files are attached, the destination Ethernet module will store only
the first file and ignore the rest of the attached files.
POINT
As for an e-mail program that sends e-mail to the Ethernet module, use a program
that can designate the encoding method (Base 64/7 bits/Quoted printable) for
attached files.
New Message
(c)
Send
To:
Subject:
Attach:
Mail address of Ethernet module
(a)
(b)
(d)(e)
01234567.bin (12 bytes)
TESTMAIL