Filter
Top Products
English
17
OPERATION OF SETTING BUTTONS
The following operation buttons are displayed in the various setting windows such as the initial setting
and menu setting windows. The basic functions of each button are the same for each window.
Button Button function and related operations
Table setting Tab input data is saved, but it is not sent to the DVR.
•
When a button is clicked, the setting data is checked, and if an
error is found, an error message is displayed.
•
If the data has been saved correctly, the tab index changes to
yellow and a message will be displayed saying that the unit is
ready to upload to the DVR. (Menu setting)
Cancels input and setting data.
•
If [APPLY] has not been clicked yet, the input data will be
canceled.
•
If [APPLY] has already been clicked, the original setting values
can be restored by clicking the [CANCEL] button and then using
[IMPORT] or [OPEN] to load the original data.
•
If an [IMPORT] or [OPEN] operation has not yet been carried
out, the values in the displayed tab will be returned to the
default settings.
•
If the tab index has changed to yellow, use the [CANCEL]
operation to return it to the normal color. (Menu setting)
Saving and
loading
This loads the current menu data from the selected DVR.
•
Menu data can also be loaded by double-clicking the DVR
name in the “TARGET” window.
•
If the tab index has changed to yellow, use the [IMPORT]
operation to return it to the normal color.
This loads the data that has been saved in the setting file on the
computer’s hard disk.
This uploads the setting data to a DVR.
•
For menu settings, the data that will be uploaded is the data for
tabs with indexes that are displayed in yellow.
•
After the data is uploaded, the tab indexes will return to their
normal color.
Saves the data being edited onto the hard disk of the computer.
•
The “Save as” dialog box will be displayed. Specify the
destination folder and filename and then click [SAVE].
•
File format: DSR-M804 Series Setup File (*.hbc)
•
If carrying out a menu upload from the “BROADCAST” window,
save the menu data first.
Clears a DVR registration (only displayed for the REGISTER DVR
tab).