Filter
Top Products
English
59
SAVING STILL IMAGES
(User Level: ID2 or higher)
Still images that are displayed during playback can be saved on the computer’s hard disk in JPEG
format.
1
Playing back images in the main window
Select the DVR in the “TARGET” window and
then click the play button in the playback control
panel.
2
Still playback at the image to be saved.
Click the still button in the playback control
panel.
3
Click in the saving control panel.
A dialog box asking you to confirm the save will
be displayed, so click [OK]. The “Save As”
dialog box for specifying the saving destination
will then be displayed.
4
Specify the filename and folder to use for
saving the file and then click [Save].
The selected image will be saved in JPEG
format in the specified destination on the
computer’s hard drive.
•
The [Save] button will be locked and
cannot be used unless a still image that
can be saved is currently being displayed.
•
There may be a difference between the
actual image saved and the image
specified, depending on the system
environment. When saving images, be
sure to re-check the image before clicking
[OK].