Filter
Top Products
English
41
BROADCAST TRANSMISSION SETTINGS
(BROADCAST WINDOW)
(User Level: ID3/4)
Basic commands can be transmitted from a single user terminal to all connected DVRs in a single
operation. This is called “broadcasting”. Click on the toolbar to display the BROADCAST
window.
The operation permissions for this window vary depending on the command being used.
1
RECORD
(User Level: 3 or higher)
Click or to broadcast recording
start and stop commands to the connected
DVRs.
2
TIMER RECORD
(User Level: 3 or higher)
Click or to broadcast “ON/OFF”
commands for setting timer recording.
3
MENU UPLOAD (User Level: ID4)
This broadcasts menu setting data that is
stored on the computer’s hard disk (data that
has been saved using the “SAVE” command)
to all connected DVRs.
1
Click .
A dialog box will be displayed.
2
Select the required menu file that has
been saved, and then click [Open].
The selected filename will be displayed in
the “FILENAME” box of the “MENU
UPLOAD” window.
3
Click .
The menu setting details will then be
transmitted.
You can select whether to transmit the
“Camera Title” and “Motion Sensor”
settings or not. To transmit the setting,
select the check box.
1
2
3
4
5
You should first save the menu setting
details into a file before using this
function.