Filter
Top Products
20
English
INITIAL SETUP (SETUP WINDOW) (User Level: ID4)
■ REGISTER DVR tab (Operation only possible at master computer)
The operations in this tab are limited to the master computer only. They let you register and delete
DVRs that are connected to the monitoring network. Slave computers obtain the registration information
by communicating with the master computer.
●
Names and functions of each window component
1
TCP/IP addresses (IP ADDR.)
This shows the addresses for registered DVRs.
2
TCP/IP address select buttons
(AUTO/MANUAL)
These buttons select the method (automatic
or manual) to use for assigning DVR
addresses.
3
DVR names (DVR NAME)
This shows the registration names for the
DVRs.
(When a new DVR is registered, the last digits
of the MAC address are used as the default
setting.)
4
Attribute groups (GROUP)
This shows attribute groups (such as setup
location) for registered DVRs.
5
Media Access Control Address
(MAC ADDR.)
This shows the unique machine addresses for
each DVR. These addresses are displayed
automatically.
6
DVR type (TYPE)
Shows the types of DVRs connected.
•
DSR-M804/DSR-M800
7
Registration list create button
(CREATE LIST)
In AUTO mode, the list is created using the
Automatic setting method (P.21), and in
MANUAL mode, it is created using the
Manual setting method (P.22).
8
DVR name entry box (DVR NAME)
When registering a new DVR, type the name
for the DVR in this box using 10 alphanumeric
characters or less.
(When a new DVR is registered, the last digits
of the MAC address are used as the default
setting.)
2
3
8
4 5
7
6
9 F
1