Filter
Top Products
38
English
MENU SETTINGS (MENU WINDOW) (User Level: ID4)
■ MONITOR SET tab
This sets the window settings for the monitor that is connected to a DVR. Select the DVR to be set from
the “TARGET” window. The selected DVR will change to blue.
<MONITOR SET>
1
SEQUENCE (Default setting: 1)
Use the spin buttons to select the display time
(window switching interval) for each channel
in the sequence screen, and then click
[APPLY].
Available settings: 1–30 seconds
<ALARM MONITOR SET>
2
DISPLAY (Default setting: QUAD)
Select the display window to use when an
alarm occurs, and then click [APPLY].
Available settings:
•
FULL: Only the channel where the alarm
occurs is displayed in a full window.
•
QUAD: A 4-screen quad screen is
displayed including the channel where the
alarm occurred.
3
ALARM PRIORITY (Default setting: LAST)
This sets the screen display order if multiple
alarms occur at more than one channel. Use
the buttons to select the display order and
then click [APPLY]. This setting is only
enabled if the previous “DISPLAY” setting has
been set to “FULL”.
Available settings:
•
LAST: Images from the last alarm
occurring have priority.
•
FIRST: Images from the first alarm
occurring have priority.
•
SWITCH: Images switch between multiple
alarms at intervals of 1 second.
1
2
3
4