Filter
Top Products
54
English
PLAYING BACK RECORDED IMAGES (User Level: ID1 or higher)
■ Functions of Each Playback Control Panel Component
(Playback) button:
This button is used to play back recorded images
at normal speed.
(Stop) button:
This button is used to stop playback and to
switch back to live mode.
•
You can freely toggle between live mode and
playback mode by clicking the Stop and Playback
buttons alternately.
(Cue and Review) buttons:
The playback speed becomes incrementally
faster when these buttons are clicked.
•
Speed increments: ×7.5, ×15, ×30, ×180
(Still) button:
This button is used to pause playback. A still
image is displayed when this button is clicked.
•
If you click the still button while playback is paused,
frame advance playback (one frame at a time) is
carried out.
•
To cancel the still, click the playback button again.
(Slow play) button:
This button can be used to carry out slow
playback after playback has been paused. The
playback speed becomes slower each time the
button is clicked.
•
Speed increments: 1/8, 1/4, 1/2
●
Notes on starting playback
•
If playback is interrupted and then resumed
using the computer, playback will resume from
the point where it was previously stopped.
•
The DVR will be reset once the software is
closed, so playback will start again from the
beginning of recording next time. This is the
same as resetting the DVR itself.
●
Playback speed display
The playback speed appears in the title bar of the
playback window.
(Display example: PLAY × 1/2)
●
Sound playback
If the “AUDIO RECORDING” menu setting is set
to “ON”, you can play back the sound that was
recorded along with the images. The method of
selecting the cannel and adjusting the sound is
the same as for live images. (P.48)
The rate displayed for the playback
speed is a guide to the playback speed.
It may vary from the actual playback
speed rate.