Filter
Top Products
24
English
CLOCK AND SYSTEM UPDATE SETTINGS (User Level: ID4)
■ SYSTEM UPDATE tab
Use this tab window to specify a filename to use
for updating DVR firmware.
1
Click the “SYSTEM UPDATE” tab index.
The “SYSTEM UPDATE” tab window will be
displayed.
2
Select a DVR in the “TARGET” window.
The display color for the selected DVR will
change to blue.
3
Click [Browse..] (1
11
1).
Reference files will be displayed in the
dialog box.
4
Specify the update file (Example:
ABCDEF.BIN), and then click [Open] (4
44
4).
The full path and filename for the update file
will appear in the “FILENAME” box (2) in
the “SYSTEM UPDATE” window.
(Example: c:\Program Files\SANYO\
VA-SW804\ABCDEF.BIN)
5
Click [APPLY] (3
33
3).
A dialog box asking you to confirm the
update will be displayed. Click [YES] to
continue with the update.
To change the name of the file that has
been entered, click [CANCEL] before
clicking [APPLY].
6
Run the update.
A dialog box showing the progress of the
update will be displayed, and the green
indicator will flash.
•
Only firmware files that have been provided by SANYO can be used for updates. No other files
can be used. If you try to use a file that has not been provided by SANYO to update the DVR’s
firmware, damage to the DVR may result.
•
During recording, playback and search with the DVR, update is not possible.
•
It takes several minutes for the update to be completed, so do not disconnect from the network
or turn off the power for the computer or DVR during this time.
2 1
3
[SYSTEM UPDATE] tab
4
Reference file dialog box