Filter
Top Products
English
75
MP2 Viewer
The MP2 Viewer is a special playback software application that is used for the DSR-M804/800 series. It
can be used to play back image data in MPEG2 format that has been saved from the DVR onto a
recording medium such as and computer’s hard disk drive, a CompactFlash card or a CD-R.
■ Main Functions
1. Plays back saved images data (sound cannot
be played back).
2. Saves still playback images as JPEG files.
3. Prints still playback images.
4. Detects image tampering.
■ Operating Environment
The following operating environment is required
in order to use MP2 Viewer.
*1 Latest driver with 100% DirectX 8.1 compatibility is required.
■ Installation/Saving Location
When the VA-SW804 DVR utility software is
installed, the MP2 Viewer program is installed at
the same time.
Path to saving location: C:\Program Files\
SANYO\VA-SW804
■ Starting
When image data is downloaded from a DVR,
MP2 Viewer is also saved automatically from the
computer into the download destination folder. If
you double-click MP2 Viewer, the program will
start and you can then load the desired image
files that are saved in the folder, so that the
images can be played back regardless of where
the storage medium is taken to and used.
Minimum Recommended
CPU Pentium III, 800MHz Pentium 4, 1.7GHz
Memory 128MB 256MB
Display XGA (1024 × 768 pixel), 16-million color or greater
AGP graphics card for hardware overlay
Or motherboard with onboard graphics chip*1
OS Windows 98 Second Edition Windows XP Professional
The MP2 viewer should only be used by
itself. If you use it at the same time as
you are using other MPEG playback
software, it may not operate correctly.