Filter
Top Products
100
Basic features
Using HDMI
®
CEC Control
These functions depend on the connected devices.
The HDMI
®
CEC Player Control item is not available under the
following conditions:
❖ A non-HDMI
®
input is selected
❖ The Enable HDMI
®
CEC Control item is set to Off
❖ The connected HDMI
®
CEC device is not a playback or
recording device
HDMI
®
CEC Control input source selection
If an HDMI
®
CEC device with HDMI
®
switching capability
(e.g. an amplifier) is connected to the HDMI
®
input, you can select
another HDMI
®
CEC device that is connected to the master HDMI
®
device.
Use the INPUT button on the remote control or the control panel,
see “Learning about the remote control” on page 49.
Adjusting the amplifier’s audio
Using the TV’s remote control, you can adjust or mute the sound
volume of your amplifier.
❖ The VOL (+ -) buttons adjust the volume level.
❖ The MUTE button turns off the sound.
1 Press the MENU button. Select SETTINGS,
PREFERENCES, HDMI
®
CEC Control Setup, and then
press the OK button.
2 Press the ( / arrow) buttons to highlight Speaker
Preference.
3 Press the ( / arrow) buttons to select Amplifier.
Confirm that a connected HDMI
®
CEC device (such as DVD player,
etc.) is selected for the Amplifier input source.
❖ You can also use this function when the amplifier is connected to
the TV’s DIGITAL AUDIO OUT terminal (not HDMI
®
connection).
Select a digital audio input mode on the amplifier.
❖ These functions depend on the device connected.
NOTE
NOTE
NOTE