Filter
Top Products
168
Advanced features
Network Device Setup
3 Use the ( / / / arrow) buttons to navigate to the User
Name or Password field. The keypad will appear so that you
can enter in the user name and password. You can use the
remote control keypad, the software keypad, or the
USB/QWERTY keyboard to enter in the user name and
password.
❖ To use the remote control keypad, use the remote control
up/down buttons to enter the name and password, and
press the BLUE button.
❖ To use the software keyboard, press the GREEN button.
Use the number and letter buttons to enter in the user name
and password, and press the BLUE button to submit.
❖ To use the USB/QWERTY keyboard, use the number and
letter buttons to enter in the user name and password, and
press the ENTER button to submit.
Only the 0-9 and capital/lowercase A-Z characters may be used for
the user name and password.
Setting up the Media Renderer feature
The TV can be configured as a Media Renderer. When operating as
a Media Renderer, the TV displays content provided by a Media
Server. The selection of the media is done by the Media Controller.
The TV can play photo, movie, or audio files when operating as a
Media Renderer.
Installation
You can configure the Media Renderer settings individually, or use
Installation mode to be prompted for each setting in order.
1 Press the MENU button. Select NETWORK, Network
Device Setup, and then press the OK button.
2 Press the ( / arrow) buttons to select Media Renderer
Setup, and then press the OK button.
3 Press the ( / arrow) buttons to select Installation, and then
press the OK button.
4 Press the ( / arrow) buttons to select On, and then press the
OK button. If you want to change the device name as a Media
Renderer, highlight the Device Name field and press the OK
button. The Software Keyboard screen appears.
NOTE