Filter
Top Products
133
Advanced features
Setting up the Network
Assisted Setup
1 Press the MENU button. Select NETWORK > Network
Setup, and then press the OK button.
2 Press the ( / arrow) buttons to select Wireless Setup, and
then press the OK button.
3 Press the ( / arrow) buttons to select Assisted Setup, and
then press the OK button.
4 Press the ( / arrow) buttons to select the desired AP, and
then press the OK button.
Check the MAC address on the label or in the manual of the AP and
select an AP.
5 Select Security Key, and then press the OK button.
The Software Keyboard appears.
6 Input the Security Key using the Software Keyboard. For more
information, see “Using the software keyboard” on page 139.
7 To save your settings, press the BLUE button.
The Security Key must adhere to the following conditions:
❖ TKIP/AES: 8-63 ASCII or 64 Hex characters
❖ WEP: 5 or 13 ASCII or 10 or 26 Hex characters
8 Select Done, and then press the OK button.
Settings are not saved if the BACK button is pressed before Done is
selected.
Manual Setup
1 Press the MENU button. Select NETWORK > Network
Setup, and then press the OK button.
2 Press the ( / arrow) buttons to select Wireless Setup, and
then press the OK button.
3 Press the ( / arrow) buttons to select Manual Setup, and
then press the OK button.
NOTE
NOTE
NOTE