Toshiba 47L6200U Flat Panel Television User Manual


 
37
Connecting Your TV
Using the TV remote and HDMI® CEC Control to control
more information, see “Selecting the video input to view” on
page 86.
To connect a DVI device, you will need:
HDMI
®
to DVI adapter cable
For proper operation, the length of an HDMI
®
to DVI adapter
cable should not exceed 9.8 ft (3m). The recommended length
is 6.6 ft (2m).
3.5mm Stereo to RCA Y-cable
An HDMI
®
to DVI adapter cable transfers video only. Separate
analog audio cables are required (see illustration).
To ensure that the HDMI
®
or DVI device is reset properly:
When turning on your electronic components, turn on the TV
first, and then the HDMI
®
or DVI device.
When turning off your electronic components, turn off the
HDMI
®
or DVI device first, and then the TV.
[1] EIA/CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwidth digital content
protection, which is being standardized for reception of high-
definition video signals. Because this is an evolving technology, it is
possible that some devices may not operate properly with the TV.
Using the TV remote and HDMI
®
CEC Control to control other
devices
To control the basic functions of connected audio/video devices
using the TV’s remote control, connect an HDMI
®
CEC compatible
audio receiver or playback device. The HDMI
®
CEC Control
feature uses CEC technology as regulated by the HDMI
®
standard.
(Sample Illustration) L6200U/L7200U Series—Connecting an
HDMI
®
CEC compatible audio receiver and playback device
NOTE
NOTE
TV back panel
HDMI
OUT HDMI
IN
HDMI
OUT
HDMI
OUT
Audio receiver
Playback device
Playback device
(HDMI®-CEC DVD player, etc.)
(HDMI®-CEC DVD player, etc.)
HDMI cable
HDMI cable