Filter
Top Products
59
Initial Setup and Menu
MediaGuide Setup
2 Using the ( / arrow) buttons, select the type of Wireless
setup option: Easy Setup (WPS), Assisted Setup, or Manual
Setup.
❖ Easy Setup (WPS). If your Access Point (AP) supports WPS, this
method can be used. WPS is a standard designed to simplify the
connection of wireless LAN equipment and the setup of network
security features.
❖ Assisted Setup (setup using the AP's notification information).
The Network Name, Authentication, and Encryption are decided
based on information from the AP. You need to manually set the
Security Key for this method.
❖ Manual Setup (to input all settings manually).
3 Once your wired or wireless network has been configured,
perform a Network Connection Test.
A network connection test screen will appear while the test is
being performed. If the test was successful, the successful
connection screen will appear.
If the network connection test failed, the connection failure
screen will appear.
For more information, see“Setting up the Network” on
page 131 .
4 Press the OK button on the screen to return to the Initial Setup
menu.
In order to secure your home network, it is strongly recommended
that you use a wireless access point with encryption.
MediaGuide Setup
During the Initial Setup, the MediaGuide screen will appear with
the message, “MediaGuide setup will now begin. If you wish to
skip, please select Skip.” To start the MediaGuide Setup, select
Next on the screen, or to skip the setup, select Skip. If you wish to
skip this setup, you can setup the MediaGuide at any time through
the setting menu of the MediaGuide application.
To setup your MediaGuide:
When you select Next (as described above) the Connect to the
Network screen will appear.
NOTE
NOTE