Toshiba 47L6200U Flat Panel Television User Manual


 
38
Connecting Your TV
Connecting an HDMI® audio system
To connect an audio receiver and playback devices, you will need
HDMI
®
cables, see “HDMI
®
cable (with HDMI Logo)” on page 28.
If several devices are connected, HDMI
®
CEC Control feature may
not operate properly, see “HDMI
®
CEC Control input source
selection” on page 100.
For proper operation, it is recommended that you use HDMI
®
cables
with the HDMI
®
Logo ( ).
Before controlling the devices:
For an explanation of setup and operations, see “Other HDMI
®
CEC Control functions” on page 101.
Configure the connected devices. See each device’s operation
manual.
This feature is limited to models incorporating Toshiba’s
HDMI
®
CEC Control feature. However, Toshiba is not liable for those
operations. See the individual instruction manuals for compatibility
information.
When using an external AV amplifier the picture and sound may
not be properly synchronized. In this case, adjust the delay time of
the sound on the AV amplifier.
The control range of the delay time differs according to the device
you use.
Connecting an HDMI
®
audio system
If your HDMI
®
amplifier supports ARC, audio from the TV can be
sent to the amplifier via an existing HDMI
®
cable.
NOTE
NOTE
NOTE