Toshiba 47L6200U Flat Panel Television User Manual


 
102
Basic features
Viewing the HDMI® signal information
If your HDMI
®
connection is capable of 1080p and/or your TV is
capable of refresh rates greater than 60 Hz, you will need a High
Speed HDMI
®
cable. Conventional HDMI
®
/ DVI cables may not work
properly with this mode.
Select the appropriate HDMI
®
input mode (HDMI 1, HDMI 2,
HDMI 3, or HDMI 4):
1 Press the MENU button. Select SETTINGS,
PREFERENCES, AV Connection, and then press the OK
button.
2 Press the ( / arrow) buttons to select HDMI RGB Range,
and then press the OK button.
3 Press the ( / arrow) buttons to select a setting.
Viewing the HDMI
®
signal information
1 Press the MENU button. Select SETTINGS,
PREFERENCES, HDMI Information Display.
2 Press the ( / arrow) buttons to select On. Press the INFO
button.
The normal banner and signal information banner appear.
The signal information banner will appear when this feature is
set to On and you watch an HDMI
®
input.
If you press the INFO button when this feature is set to Off, only
the normal banner will appear.
Using your computer with the TV
Adjusting the image
If the edges of the picture are hidden, readjust Horizontal Position
and Vertical Position. If the picture is affected by interference,
readjust Clock Phase and Sampling Clock.
1 Select PC input mode, see “Selecting the video input to view”
on page 86.
2 Press the MENU button. Select SETTINGS,
PREFERENCES, Display Settings, and then press the OK
button.
NOTE
NOTE